GONDOLA END SOLUTIONS

Wall End Display creates a promotional opportunity at the end of an Island run. Customize your display with various Back styles and accessories.

Contoured End Display is a freestanding end display similar to the Wall End Display. It features Shelves and Decks with rounded edges, giving your display a softer look.

The No Base Wall End Display is a wall end display without base deck components. This End Cap style is ideal for finishing a Gondola run with a bulk display.

Contoured End Display featuring Contoured End Display Wings

Draw attention to your Gondola run with a Step Down End Cap. This configuration is ideal for seasonal merchandise that needs to move off shelves quickly. Example features a Contoured End Display, using Shelves and Decks with rounded edges to give your display a softer look.

End Deck locks onto Base End Trim and can easily be removed by releasing locking clips. No tools are required and the End Merchandising Panel does not need to be removed to install or release End Deck.

Flush Merchandise Panel hangs on the outside of Uprite, allowing for more merchandising options.

As the full height version of the FMP, the Full Height Merchandise Panel rests on the floor with leveling legs.

Attract attention to your End Caps with Wire Wing Panels. Panels mount directly to the Uprite.

Order Contoured End Deck with other Contoured End Display components. The Standard Deck features rounded corners on both corners and 1.235″ Tag Molding formed on all three sides. The LH/RH decks feature a rounded corner on one side and 1.235″ Tag Molding formed on 2 sides.

Order Contoured End Shelves with other Contoured End Display components. The Standard Shelf features rounded corners on both corners and 1.235″ Tag Molding formed on all three sides. The LH/RH shelves feature a rounded corner on one side and 1.235″ Tag Molding formed on 2 sides.

Contoured Base End Trims close off base brackets on Contoured End Displays.

Anchor a freestanding Wall End Display to an Island section with a Wall End Display Stabilizer.

​

​

​

Secures the Wall End Display Wings or Contoured End Display Wings to the Wall End Display End Cap or Contoured End Display End Cap

Wall End Positioner maintains the position of your End Display, keeping it from moving by wayward shopping carts or floor scrubbers.

Use the Outside Mount Conversion Kit to convert End Merchandising Panel so it will accommodate offset applications.

Top Rail Hold Down Kit secures Top Rail to Uprite. Kit is required when using End Merchandising Panels on Island Sections that don’t have Shelves in the last section of the run.

Close off your Wall or Island run with a Wood End Panel. Included Panel Hooks are reversible for left-hand or right-hand applications.