GONDOLA SYSTEMS

Add these components to your Island Section(s) to finish off an Island run.

Add these components to your Wall Section(s) to finish off a Wall run.

​

​

​

​

​

​

​

Order one set of components to complete a Caster T-Leg Island run.

Convert your Wall or Island Gondola into a no-deck unit with T-Legs. Will work on any run length.

Our versatile Wire Grid Backs offer display solutions that are flexible, low-maintenance and durable. Choose from four Wire Back options: Slot Grid, Multi Grid, and Louver Grid.

Uprite End Trim snaps onto first and last Uprite and/or Extension Uprite to finish the appearance of your Gondola.

Uprites are an essential component, supporting your Backs, Rails, Shelves, Decks, Base Brackets and more. Each face of the Uprite serves a purpose in supporting your Gondola.

When planning to mount your fixture to a wall, order Wall-Mount Uprites instead of standard Uprites.

​

​

​

​

​

​

​

​

​

​

​

Wire Backs require Back retainer to fit backs into Uprite. Choose the style that best fits your visual merchandising needs.

​

Lozier’s Hardboard Backs are available in a number of options including Pegboard, Marteck and Woodgrain. See below for specific styles and finishes.

​

​

​

Choose the Wire Grid Backs that fit your store environment and merchandising needs. We have three styles available: Slot Grid, Multi-Grid, and Louver Grid.

​

Finish off your Island or Wall Shelving run with our Base End Trim. The Trim attaches to the first and last Base Bracket of the run, hiding the Bracket from customers’ view.

The Closed Base Front snaps in place at the foot of your Island or Wall section to block dust and other objects from collecting under your fixture. The Closed Base Front fits flush with the floor regardless of leveling adjustments.

Order the Gap Filler to fill the open space between the Bottom Rail and floor on the rear side of your Wall run.

The Open Base Front is used at the foot of your Island or Wall section in place of a Closed Base Front. The open front makes for easy clean-up underneath your fixture.

Base Bracket serves as the foot of your Wall or Island section, locking into the Uprite using an integral spring latch.

Create an Island Gondola without Backs using the Open Back System.

Inside Uprite Trims work with the Open Back System to hide the sides of Uprites from view. Two Inside Trims are required per section.

Shelf Fillers fill the gap between two Shelves mounted across from each other in an Open Back System. They cannot be used with Shelves that are placed in the top Uprite slot.

The Open Back Spanner works with the Open Back System. It replaces Backs and Rails, and fits flush with the top of the Base Deck in both 06 and Low Base applications.

Base Bracket Anchor Plates are required when your fixture exceeds height-to-depth ratio limits and for fixtures over 5′ tall in certain seismic zones. The plates secure each Leveling Leg to the floor using anchor bolts.

Use Multi-Purpose Anchor Plates at the end of a run, Wall End Display, Base Bracket, Uprite or other limited access applications. Anchor Plates are required when your fixture exceeds height-to-depth ratio limits and with fixtures over 5′ tall in certain seismic zones.

Uprite Anchor Plates are required when your fixture exceeds height-to-depth ratio limits and for fixtures over 5′ tall in certain seismic zones. The plates secure each Uprite to the floor using anchor bolts.

Use the Wall Mount Bracket to secure your Wall Gondola to a building wall. The Bracket snaps on the Uprite and fastens to the wall.

Use the Wall Mount Bracket (Slot Mount) to secure your Wall Gondola to a building wall. The Bracket inserts into an Uprite slot and fastens to the wall. Available in Center and End configurations.